Manuel d’utilisation pour les modèles NEXT BASE incluant : Dash Cam NBDVR122
Manuel de l’utilisateur NBDVR122 R2
Alex Thomas
NBDVR122 Manuel de l’utilisateur R2 – Vivid Racing
Voir les pages 9-10 du manuel des accessoires Nextbase pour de plus amples informations. Acheminez le câble d’alimentation autour du pare-brise jusqu’à la prise 12-24Vdc, en veillant à ce que ….
Veuillez suivre les instructions ci-dessous pour la première installation de la Dash Cam. Pour une utilisation quotidienne, il suffit de retirer la caméra du support selon les besoins.
NBDVR122-User-Manual..> ;
Index de /wp-content/uploads/2021/09
Ce n’est pas votre appareil ? Recherche de manuels / fiches techniques :
Info Fichier : application/pdf, 33 Pages, 13.50MB
DocumentDocumentNBDVR122-Manuel d’utilisation R2
User Manual Introduction to your Dash Cam This range of NextbaseTM Dash Cams has been designed specifically with ease of use in mind; it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Please check the firmware version of the Dash Cam, the version can be found in the Setup menu under System Info. The latest versions are available to download from our website, where you can download and update when necessary. www.nextbase.com Basic Operation It is essential that a quality branded Class 10 or U1 type Micro SD card is used with this Dash Cam use to the very large data rate generated by high resolution recording. For best results, we recommend using our NextbaseTM branded SD cards with your Dash Cam. Your NextbaseTM Dash Cam is set to record video, in files of just 1 minute in length. This means that each video file is a manageable size should you need to download and send to your insurance company. Eventually your MicroSD card will fill up with video files but don't worry, the camera automatically deletes the oldest file to make space for new recordings. This way you never run out of space and have plenty of driving data saved. Typically a 16Gb card will store the last 1.5 hours of driving footage. For summer months where the clocks are brought forward or for driving in other countries, adjust the time in the Setup Menu (Time & Date) to account for the time difference from GMT by adding or subtracting 1 hour as required. There are 3 modes of camera operation - Video, Photo and Playback. Press the MODE button on the Dash Cam to select required mode. Video Mode: The default mode when the camera is turned on, for video recording. Photo Mode: Allows you to take still photographs. Playback Mode: Allows you to view recorded video or photographs upon the Dash Cam LCD screen. Automatic Start / Stop Technology The Dash Cam will automatically power on and be ready to use once power is available. In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on. When power is cut off, the Dash Cam will perform an automatic shutdown process. 1. Tips for capturing best video footage: 1.1 Position the Dash Cam in the centre of the windscreen and ideally behind the rear view mirror so it is not a distraction to the driver. 1.2 Ensure that the area on the windscreen that the Dash Cam is looking through is clear of dirt and is within the wiper zone. This will ensure that your videos are as clear as possible. 1.3 Reduce the amount of sky in the picture, by angling the view of the camera towards the road. Too much sky will make the road appear darker due to the automatic exposure compensation. 1.4 Remove unnecessary items from your dashboard. If objects are placed on your dashboard these can cause reflections to be seen on the windscreen and these reflections may be captured during recording. 1.5 To improve dash board glare, a NextbaseTM Polarising Filter can be purchased. 2. Tips for stable memory card performance: 2.1 Periodically format the memory card. Every 2-3 weeks we recommend that you format the memory card. This will wipe any files from the card and set it up afresh for continued use with your Dash Cam. Of course, you should only do this AFTER you've downloaded any files from the card that you may want to keep, as formatting the card will remove all content. 2.2 Format your memory card using the Dash Cam. This will make sure that the card is structured specifically for your camera. Press MENU twice and choose the Format Card option. Follow the on-screen instructions accordingly. 2.3 Switch off the Dash Cam before removing the SD memory card, to prevent the chance of damage being caused to the memory card or the files stored upon it. 02 Table of Contents INTRODUCTION TO USING YOUR DASH CAM TABLE OF CONTENTS PRECAUTIONS / CAUTIONS ON USING THIS PRODUCT PRODUCT WARNINGS USAGE PRECAUTIONS / NOTICES / CANADA COMPLIANCE FCC STATEMENT FCC- SUPPLIER'S DECLARATION OF CONFORMITY PRODUCT SPECIFICATION PACKAGE CONTENTS / PRODUCT FEATURES CAMERA PARTS & CONTROLS CAMERA PARTS & CONTROLS (CONT.) IN VEHICLE INSTALLATION POSITIONING YOUR DASH CAM / ACCESSORIES CHANGING MOUNT ATTACHMENTS FIRST TIME USE MENU / VIDEO MENU OPTIONS MENU / SETUP MENU OPTIONS SETUP MENU OPTIONS 02 03 04 05 06 07 08 09 10 11 12 13 - 16 17 18 19 20 21 22 VIDEO MODE / PHOTO MODE / PLAYBACK MODE PLAYBACK MODE MENUS - DELETE & PROTECT PC CONNECTION / FIRMWARE UPDATE INFORMATION NEXTBASETM SD CARDS / CE MARK INFORMATION FREQUENTLY ASKED QUESTIONS (PAGE 1) FREQUENTLY ASKED QUESTIONS (PAGE 2) SOFTWARE LICENSE AGREEMENT WARRANTY / ONLINE & INTERNATIONAL PURCHASES MORE NEXTBASETM PRODUCTS DASH CAM FUNCTIONS 23 24 25 26 27 28 29 30 31 32 03 Precautions Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problems. WARNING: CAUTION: LCD: WEEE: CHOKING HAZARD: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire. To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so. Have the unit serviced by a qualified service technician if; The unit has been exposed to rain or water. The unit does not seem to operate normally. The unit exhibits a marked change in performance. A Liquid Crystal Display (LCD) screen is a multilayer complex component, containing 230,400 pixels. Pixels can however fail during normal product life. 1 pixel = 0.000004% failure rate, and one pixel failure per year of operation is considered normal and not a cause for concern. Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. This symbol on the product or on the packaging indicates that this cannot be disposed of as household waste. You must dispose of your waste equipment and/or battery by handing it over to the applicable take-back scheme for the recycling of electronic equipment and/or batteries. For more information please contact your local household waste disposal office. Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children. Cautions on Using this Product 1. Ensure that the windscreen is free of dirt or grease before placing mount upon it. 2. Do not obscure the view of the road ahead or impede the deployment of any airbags in the event of an accident. 3. When not in use, please disconnect the car adaptor from both the 12/24Vdc outlet in your vehicle and the Dash Cam itself. 4. Only clean the Dash Cam with a soft dry cloth, for tough dirt, apply some neutral detergent diluted in 5 to 6parts water to a soft cloth. Please note that alcohol, thinner, benzene etc could cause damage to the paint or coatings. 5. Avoid making contact with the lenses as damage may be caused. 6. If required clean the glass lens carefully using spectacle lens cleaning fluid on a soft cloth only. 7. The video recordings made by this Dash Cam are intended for personal use only. 8. Publication of the recordings on Youtube, the internet or other methods are subject to the Data ProtectionAct and the requirements thereof must be adhered to. If the Dash Cam is to be used within a commercial environment, i.e. truck use, then the CCTVregulation apply also, in addition to the Protection Act regulations. This includes labelling to identify the use of CCTV is taking place, the omission of Audio recording and informing the relevant authorities of who controls the data. 9. Video playback upon the Dash Cam which is visible to the driver is prohibited or restricted in some countries or States. Please adhere to these laws. 10. Whilst driving, do not adjust the controls of your Dash Cam as this is a distraction to driving. 11. Before using the Dash Cam on your windscreen, check the state and local laws and ordinances where you drive. Some laws prohibit or restrict the placement of objects on the windscreen of a motor vehicle. IT IS THE USER'S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES. Always mount your NextbaseTM Dash Cam in a location that does not obstruct the driver's view of the road. NextbaseTM does not assume any responsibility for any fines, penalties, or damages of your NextbaseTM Dash Cam. NextbaseTM accepts no responsibility for any damage or injury caused when the Dash Cam is in use. Distractions can lead to accidents, and the risk of injury or death. Always keep your eyes on the road, and keep aware of your surroundings. 04 Product Warnings Failure to heed the following warnings could result in an accident or collision resulting in death or serious injury. Distraction Warning This Dash Cam is intended to enhance the situational awareness when used properly. If used improperly, you could become distracted by the display, which could lead to an accident causing serious personal injury or death. DO NOT seek to access the information stored on the Dash Cam or change the device settings whilst driving. Information stored on the Dash Cam should be reviewed only when your vehicle is stationary, and you are parked in a safe place in compliance with local laws. The Dash Cam settings should only be changed when your vehicle is stationary, and you are parked in a safe place in compliance with local laws. Always maintain awareness of your surroundings and do not stare at the display or become distracted by the display. Focusing on the display could cause you to miss obstacles or hazards. Use the Dash Cam at your own risk. Do not change settings, or access any functions requiring prolonged use of the Dash Cam controls while driving. Pull over in a safe and legal manner before attempting such operations. Video playback upon devices with displays which are visible to the driver, is prohibited or restricted in some countries or states. Please adhere to these laws. Vehicle Installation Warnings When installing the Dash Cam in a vehicle, do not place the Dash Cam where it obstructs the driver's view of the road or interferes with vehicle operating controls, such as the steering wheel, foot pedals, or transmission levers. Do not place unsecured on the vehicle dashboard. Do not place the Dash Cam in front of or above any airbag. Battery Warnings Lithium-ion batteries are used in most NextbaseTM Dash Cams. If these guidelines are not followed, batteries may experience a shortened life span or may present a risk of damage to the Dash Cam, fire, chemical burn, electrolyte leak, and/or injury. - Do not disassemble, modify, remanufacture, puncture, or damage the Dash Cam or batteries. - Do not remove or attempt to remove the non-user replaceable battery. - Do not expose the Dash Cam to fire, explosion, or other hazard. - Do not expose the Dash Cam to rain or water. Magnet Warnings Both the Dash Cam and its mount may contain magnets. Under certain circumstances, magnets may cause interference with some internal medical devices, including pacemakers and insulin pumps. Devices and mounts that contain magnets should be kept away from such medical devices. Magnets may cause damage to some electronic devices, including hard drives in laptop computers and bank / credit or membership cards. Use caution when devices and mounts that contain magnets are near electronic devices or bank / credit or membership cards. 05 Usage Precautions Failure to heed the following notices could result in personal injury or property damage, or negatively impact the Dash Cam functionality. Battery Precaution - Do not immerse or expose the Dash Cam or batteries to rain, water or other liquids. - Do not leave the Dash Cam exposed to a heat source or in a high-temperature location, such as in the sun or in an unattended vehicle. To prevent the possibility of damage, remove the Dash Cam from the vehicle or store it out of direct sunlight, such as in the glove box. - Do not operate the Dash Cam outside of the following temperature range: from -20° to 45°C (from -4° to 113°F). - When storing the Dash Cam for an extended time period, store within the following temperature range: from 0° to 25°C (from 32° to 77°F). - Do not use a power and/or data cable that is not approved or supplied by NextbaseTM. - Contact your local waste disposal department to dispose of the Dash Cam/batteries in accordance with applicable local laws and regulations. Windshield Mounting Legal Restriction Precaution Before using the Dash Cam on your windscreen, check the state and local laws and ordinances where you drive. Some laws prohibit or restrict the placement of objects on the windshield of a motor vehicle. IT IS THE USER'S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES. Always mount your NextbaseTM Dash Cam in a location that does not obstruct the driver's view of the road. NextbaseTM does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your NextbaseTM Dash Cam. Camera Legal Requirements Precaution In some jurisdictions it could be considered an invasion of privacy rights to take or publicly display photographs or videos of people or their vehicles using this product. It is your responsibility to know and comply with applicable laws and rights to privacy in your jurisdiction and in any jurisdiction in which you may use this device. Video recordings made by this Dash Cam should be for personal use only. Publication of the recordings on YouTube, the internet or other methods is subject to the data protection legislation and the requirements thereof must be adhered to. Such data protection legislation may prohibit the use and dissemination by you of Dash Cam footage or may impose restrictions on it we recommend that you check the legal requirements with your legal advisor before disseminating any Dash Cam footage. If the Dash Cam is to be used within a UK commercial environment, i.e. truck use, then the CCTV regulations apply in addition to the Data Protection Act regulations. This includes labelling to identify the use of CCTV is taking place, the omission of Audio recording and informing the relevant authorities of who controls the data. For use in a commercial environment in non-UK countries, please refer and adhere to local regulations and requirements. For non-UK operation, specific legal requirements may apply where Dash Cams are to be used in a commercial or employment context - again, we recommend that you check the legal requirements with your legal advisors prior to commencing use of Dash Cams in commercial or employment contexts. Notices G Sensor Notice The G Sensor within the Dash Cam measures forces exerted upon it, with reference to one G which is the nominal force exerted upon us when stationary on the earth's surface. The G Sensor will also trigger to protect any recording currently in progress, if a pre-determined threshold of force is exceeded. The G Sensor protection will be adversely affected if the Dash Cam is NOT mounted in the vertical direction i.e. with the lens pointing to or from the direction of travel. G Force information derived from a G Sensor is not warranted to be totally accurate at all times, as it is derived from the G Sensor through a sampling method over time. The precision of the G Sensor value recorded depends upon when the acceleration took place at the instance of the sample taken. The thresholds to trigger the video protection rely upon a trigger value being exceeded between two successive samples, in any one of the three G Sensor axis. If the Automatic G Sensor protection does NOT trigger during an event, then the Protect button should be pressed, in order to protect the file. Protecting the file can also be performed using the Playback function upon the Dash Cam, or through the MyNextbase ConnectTM App for applicable Wi-Fi enabled models. Innovation, Science, and Economic Development Canada Compliance This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 06 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. - This appliance and its antenna must not be co-located or operated conjunction with any other antenna or transmitter. - A minimum separation distance of 20cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. FCC CAUTION: This product does not contain any user-serviceable parts. Repairs should only be made by an authorised NextbaseTM service centre. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. 07 FCC - Supplier's Declaration of Conformity Statement SUPPLIER'S DECLARATION OF CONFORMITY (47 CFR Section 2.906). We; Tank Design (The responsible party, who must be located in the United States) Hereby, Declare that the essential requirements set out in the 47 CFR Sections 2.906 of FCC, have been fully fulfilled on our product with indication below: 1. Applicant's Info Company Name: Portable Multimedia Ltd Mailing Address: Unit 2, Caerphilly Business Park, Van Road, Caerphilly. CF83 3ED. UK Contact: Graham Lambert Tel: +44 02920 866429 Email Address: support@nextbase.com 2. Product Info Product Name: Dash Cam Model No.: NBDVR122 Brand Name: Nextbase 3. Applied Standard Standards FCC Part 15 Subpart B: 2017 Report No. WTS19S02008892E 4. Test Firm Used to Take Measurements: Name: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F, Fukangtai Building, West Baima Rd Songgang Street, Baoan District, Shenzhen, Guangdong, People's Republic of China, 518105 Contact Name: Philo Zhong Tel: +86 755 8355 1033 802 Email: CB@waltek.com.cn Designation No.: CN1201 FRN: 523476 5. FCC Marking 6. Responsibilities and obligations Strictly follow the FCC rules of 2.906, 2.908, 2.909. 7. Applicant's Authorisation Company Name: Portable Multimedia Ltd Mailing Address: Unit 2, Caerphilly Business Park, Van Road, Caerphilly. CF83 3ED. UK Contact person: Graham Lambert Signature: Email Address: support@nextbase.com Tel: +44 02920 866429 Date: 20th March 2019 8. Responsible party in US. Company name: Tank Design Mailing Address: 158 Sidney Street, Cambridge, MA 02139, United States Contact person: Mr Scott Watts Signature: Email address: SWatts@tankdesign.com Tel: (617) 388-8380 Date: 20th March 2019 08 Product Specification Model Number / Name Power Requirements Power Supply Sensor Resolution Lens Type / Angle / Aperture Recording Resolution Photo Resolution Screen Size Screen Resolution Screen Ratio Card Reader SD Card (Recommended Type) SD Card Recorded File Capacity (based on default settings) Recording Format Internal Battery Unit Dimensions Unit Weight NBDVR122 5V / 1.5A 12-24Vdc Car Power Cable (supplied) Fuse Type: 20mm / 2A Output: 5Vdc Hardwire Kit also available to purchase for a hidden, permanent power supply. 1M Pixel (1,000,000 Pixel) 4G / 120° / F2.2 1280 x 720 @ 30fps (default) 1280 x 960 2.0" 320 (W) X 240 (H) pixels x RGB (960) 4:3 MicroSD, Class 10, U1, up to 32GB 8-32GB SDHC, U1, Class 10 (48mb/s), for best results use a recognized brand 8GB MicroSD = 45 minutes of recording 16GB MicroSD = 90 minutes of recording 32GB MicroSD = 180 minutes of recording AVI Lithium-Polymer 3.7V / 280mAh (approx. 15 mins recording time) Battery design allows the 'Auto Power Off' feature to function in event of power loss within the vehicle. It is not intended as an alternative power source to replace the supplied car power cable. 80 x 50 x 44 82g Mac is a registered trademarks of Apple Inc. in the United States and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. MicroSDTM and the microSD logo are trademarks of SD-3C, LLC. Other trademarks and trade names are those of their respective owners. 09 Package Contents Please check the contents of your NextbaseTM Dash Cam product. NextbaseTM 122 Dash Cam Your Dash Cam to record the road ahead Click & Go Powered Mounts: Suction and Adhesive Car Power Cable (4m) Two mount attachments for you to choose between. Charge your Dash Cam in car using the Car Power Cable USB Connection Cable Connect your Dash Cam to a PC 122 Quick Start Guide Quickly get your Dash Cam up and running using Quick Start Guide. Product Features Thank you for purchasing this NextbaseTM Dash Cam product, in this section we will outline some of the features available with this Dash Cam. HD Recording Capability 720p HD recording at 30 fps, to record the road ahead. Click & Go Pro Powered Mount Click and Go Pro powered magnetic car mount to easily install and remove your Dash Cam. Supplied with both adhesive and suction fittings. G Sensor / File Protection In the event of an impact the device will automatically 'protect' the recording, stopping the file from being over-written and saving it for future review. This can also be performed manually, by pressing the `protect' button. Individual files can also be 'protected' when viewed within playback mode. Automatic Start / Stop Technology As soon as the vehicle ignition is turned on, your Dash Cam will start to record automatically. When the ignition is turned off, the Dash Cam will perform an automatic shutdown process. Intelligent Parking Mode Intelligent Parking Mode automatically starts recording when motion is detected, keeping your car safe when parked. Built-in Microphone & Speaker Record audio to compliment the video recordings. NextbaseTM Cloud Service View and share your footage online using the MyNextbase CloudTM service. Upload your video to the NextbaseTM server to get a shareable link to send to friends, insurers, and social media. Upload your videos via the file upload area on Mynextbase.com. The uploaded file will be deleted after 30 days, when the link will also expire. Cable Tidy Tool Use the Cable Tidy Tool to stow the power cable within the lining of your car. Product appearance may differ slightly to that shown above. 10 Camera Parts and Controls See below to identify the parts and controls of your Dash Cam 1 2 1 Dust Cover Mounting point located under the dust cover. 2 Speaker Integrated speaker for audio playback. 3 Camera Lens Wide angle 120º. 4 Power Button Press and hold for 2 seconds to turn the Dash Cam On/Off. 5 Menu Button Press to open the Dash Cam's menu system. 6 Mode Button Press to select video/photo/playback modes. 4 3 5 6 9 11 OK 10 11 MODE MENU 7 8 7 LEDs Top: Blue - The Blue LED will be on while the Dash Cam is charging. It will turn off when charging is complete, even if the Dash Cam is still plugged in. Bottom: Red - The Red LED is permanently on while the Dash Cam is active. It will flash while recording. 8 Protect Button Press whilst recording to protect the current file in event of an emergency situation. 9 Screen 2 Inch High Resolution Screen. 10 Record Video Mode: Press to Start/Stop recording. Photo Mode: Press to take photo. In the Menus: Select. 11 Up/Down Buttons In the Menus: Use to navigate the menus within the camera. Video Mode: Down to turn the screen ON/OFF, Up to turn the audio recording ON/OFF. Playback Mode: Scroll through your videos/photos. 11 Camera Parts and Controls (cont.) See below to identify the parts and controls of your Dash Cam 14 12 15 13 12 USB Cover USB-PC port located under the dust cover. 13 Reset Button Press to force a hard restart of the Dash Cam. 14 MicroSD Card Slot Insert the MicroSD card here, taking care that the gold contacts are facing towards the screen side of the Dash Cam. 15 Microphone Built-in microphone to record audio for your videos. 12 In Vehicle Installation Please follow the instructions below for the first-time installation of the Dash Cam. For day to day use, simply remove the camera from the mount as required. 1 2 1 Insert MicroSD Card Insert a suitable MicroSD card (Class 10, U1, minimum 48/Mbps) in to the Dash Cam, taking care that the gold contacts are facing towards the LCD screen side of the Dash Cam. Push the memory card until it clicks into place. Note: - Use the edge of a small coin (or similar object) to push the memory card in place if required. Take care that card has 'clicked' into place, a second push inwards will release the memory card. - For best results,we recommend using NextbaseTM branded SD cards. - Do not remove or insert the memory card when the Dash Cam is turned on. This may damage the memory card. 2 Remove dust cover from the Dash Cam Remove the dust cover that is located on the front of the Dash Cam to gain access to the mounting point. To remove the dust cover, lift the cover away from the body of the Dash Cam. Note: - If the Dash Cam is not to be used for a period of time replace the dust cover to help keep the components free of dust or other contaminants. 3 Attach the mount to the Dash Cam 3 Place the mount in space under the dust cover on the Dash Cam. Once in place, magnets within the mount and camera will hold the two parts together. See page 18 for more information on changing mounts attachments. 13 In Vehicle Installation (cont.) 4 5 12-24Vdc The above diagram is for illustration purposes only. Cable Fitting Tool (included with your Dash Cam) 4 Connect car power cable Connect the supplied car power cable to the Dash Cam Mount's USB port. Do NOT connect the power cable to the USB port on the Dash Cam. 5 Plug the power cable into the 12-24Vdc outlet of your vehicle The Dash Cam will automatically power on and start recording once power is available. In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on. Also available to purchase is a Nextbase Hardwire Kit. This connects your Dash Cam directly to the vehicle's fusebox to power it leaving your 12Vdc outlet available for Phone / Sat Nav charging. The NextbaseTM Hardwire Kit includes the necessary 12-24Vdc to 5Vdc convertor and battery protection circuitry. See pages 9-10 of the NextbaseTM Accessories Manual for further information. Route the power cable around the windshield to the 12-24Vdc socket, ensuring that your view is not obstructed, and that the cable is not a distraction. Use the cable fitting tool (bottom, left) included with your Dash Cam to more easily open the lining of your vehicle, within which you can stow the cable. See page 17, `Positioning your Dashcam' for more details. Note: - Do NOT wire the Dash Cam directly to a 12Vdc supply by cutting the cigarette plug off the end of the cable, or permanent damage will result. 14 In Vehicle Installation (cont.) 6 6 Remove the adhesive cover layer Peel back the red cover layer to expose the adhesive surface, ready to mount on your windscreen. MODE MENU MODE MENU 7 8 122 7 Straighten the Dash Cam Ensure that the Dash Cam is horizontal and faces straight out of the windscreen. Ensure that objects on the Dash Cam display appear level, and adjust as required. 122 8 Attach the Dash Cam to the windscreen When you are satisfied with the placement and orientation of the Dash Cam, firmly place the mount on the windscreen. 15 In Vehicle Installation (cont.) MODE MENU 122 9 MODE MENU MODE MENU MODE MENU 9 Adjusting the Dash Cam With the mount attached to the windscreen, ensure that objects on the Dash Cam display are level and adjust as required. Ensure that the road ahead is at the centre of the image, in the central third of the display. If too much of the sky is visible it may risk underexposing details on the road; ensure that the road ahead is clearly visible on the Dash Cam display. Do NOT attempt to adjust the Dash Cam while driving. OK 16 Positioning Your Dash Cam Please read and follow the notes below for the safe operation of your Dash Cam within your vehicle. Before installing the Dash Cam on your windscreen, check the state and local laws and ordinances where you drive. Some laws prohibit or restrict the placement of objects on the windscreen of a motor vehicle. IT IS THE USER'S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES. Always mount your NextbaseTM Dash Cam in a location that does not obstruct the driver's view of the road. NextbaseTM does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your NextbaseTM Dash Cam. As per the installation instructions, you must install the Dash Cam so it does NOT obstruct the driver's view of the road (red, above), preferably on the passenger side of the vehicle and behind the rear view mirror. The Dash Cam needs to view through a clear section of windscreen in an area swept by the windscreen wipers (green, above). However, the Dash Cam should be installed so as not to intrude significantly within the wiped area. A 40mm intrusion into the green wiped area is the maximum permitted by UK law. Hiding the Cable Make sure the hanging cable does not obstruct your view out of your rear window. Ensure that there are no kinks in the cable as you are stowing it. If necessary, use the cable tidy tool supplied with your Dash Cam; this can be used to help pry open the lining of your car (see illustration below, right). Notes On Positioning Your Dash Cam - Do NOT mount the Dash Cam in front of the driver, as depicted by the red area in the illustration to the left of this page. - When installing the Dash Cam in a vehicle, always place the device securely against the windscreen and where possible conceal the power cable under trim. - Make sure that the Dash Cam power cable does not interfere with the drivers operating controls, such as the steering wheel, pedals or gear levers. - Do NOT mount the Dash Cam in front of an airbag field of deployment or in a position to obscure any mirrors. - Clean the windscreen at the point of location, prior to fitting the Dash Cam, also, applying some moisture to the suction cup may be beneficial, to ensure absolute adhesion. - It is recommended NOT to operate the Dash Cam whilst driving. The automatic Start-Stop technology incorporated within the device negates any need to operate the controls whilst driving. - Adjust any settings or review recordings whilst stationery, not whilst driving. - After the preliminary SETUP has been carried out upon the Dash Cam, adjust the Screen Saver setting to ON; this will blank the screen automatically 30 seconds after starting the vehicle and therefore the screen will NOT be a distraction in any way to the driver. Accessories Multiple accessories can be purchased for your NextbaseTM Dash Cam, including a Hardwire Kit and Polarising Filter that can effect how best to set up your Dash Cam. For more information on how to position and use these products, download the `Nextbase Accessories Manual' PDF at www.nextbase.com 17 Changing Mount Attachments Follow the instructions below to switch between mounts attachments; 3M adhesive or suction. To attach each mount, align the pins on the mount with the holes on the adhesive/suction attachment and slide firmly to the right until you hear the pieces click into place. To remove the top, simply do the reverse, slide it to the left until you can lift it off of the mounting pins. Ensure the windshield is free of grease and dirt before mounting; if necessary, clean with a warm, clean cloth. Ensure that the Mount and Dash Cam do not obstruct the driver's view. Removing Adhesive Residue If you wish to remove the adhesive mount from your windscreen, use hot soapy water or an alcohol based solution to get rid of any sticky residue and ensure that your windscreen remains clean and clear. Leaving residue on the windscreen for an extended period of time will make it harder to remove. If hot water or an alcohol based solution proves ineffective, it may be necessary to use a small sharp blade. If this is the case, protect your fingers and use the blade flat against the surface of the glass to avoid causing scratches. 18 First Time Use To ensure the set up of this Dash Cam is as quick and simple as possible, there is an easy to follow `First Time Use' menu. This menu is used to set the Language, Time, and Date. This menu will appear when: 1. The Dash Cam is first turned on. 2. There has been a Firmware Update applied to the Dash Cam and `Keep User Settings' has been set to OFF. If It is set to ON, your Dash Cam will start normally, with your settings intact. 3. After the Dash Cam's settings have been reset, by using the `Default Settings' option in the Setup Menu. Follow the on-screen instruction to select the Language, Time, and Date. Note: - The First Time Use menu is in place to get you up and running quickly and smoothly. The settings you choose during First Time Use can be changed at any later time in the setup menus. First Time Use Screens Use the UP and DOWN buttons to select required function and press OK to confirm selection. Enter Set Time 00 : 00 : 00 Back Enter Set Date Format DD / MM / YY Back Enter MODE MENU OK Enter Set Date 01 / 01 / 2019 Back Enter Initial Setup Complete Initial setup is complete. You can change other settings if required from within the menus Back Enter 19 Menus Press the `Menu' button to enter the Dash Cam's `Video Menu' system. MODE MENU Video Menu Exposure Audio Recording OK Video Length Time & Date Stamp Back Enter The default settings have been carefully selected to allow you to use your Dash Cam without the need to change any settings. However, should you wish to change a setting then please see below: - Use the up and down buttons to highlight the function that you'd like to change and press the OK button to enter the settings submenu. - Once in the submenu, use the up and down buttons to highlight the required setting and then press OK to confirm your selection and return to the Video Menu. - Press the MENU button twice to return to video mode. Note: - Menus are not accessible whilst the Dash Cam is recording. - Within the Setup Menu which is accessed by pressing the MENU button twice, there is a `Default Settings' option to allow you to reset the Dash Cam to the factory defaults, if required. Video Menu Options Video Menu Exposure Audio Recording Video Length Time & Date Stamp Back Enter Video Menu G Sensor Back Enter 1 Exposure Adjust the exposure level for different lighting conditions. Options: Values range from -6 to +6 Default: 0 2 Audio Recording Turn On/Off the microphone for video recording Options: On and Off Default: On 3 Video Length Set the length of the individual recorded video files. The Dash Cam will continue recording, filling the memory card. When the memory card becomes full, the oldest file will be automatically deleted to make space for the new recording. Note: Protected Files will not be overwritten. If the SD Card becomes full you will be prompted to format/clear the SD Card. Options: 1 minute, 2 minutes, 3 minutes Default: 1 minute 4 Time & Date Stamp Turn On/Off the time and date stamp shown on recorded files at the bottom of the screen. Options: On and Off Default: On 5 G Sensor Turn off or adjust the sensitivity of the internal G Sensor. The G Sensor detects forces which will protect the current recording in the event of a collision. The higher the G Sensor sensitivity, the less force will be needed to trigger automatic file protection. Note: If you have a car with firm suspension you may wish to adjust this to LOW. Likewise if you have soft suspension you may wish to adjust this to HIGH Options: Off, Low, Medium, High Default: Medium 20 Menus (cont.) Press the `Menu' button again when in `Video Menu' to enter the Dash Cam's `Setup Menu' system. MODE MENU Setup Menu Format SD Card Time & Date OK Language Screen Saver Back Enter Setup Menu Options Setup Menu Format SD Card Time & Date Language Screen Saver Back Enter 1 Format SD Card Format the inserted SD card. This will delete all content. Note: For stable performance, it is recommended that you format the memory card every 2-3 weeks. You should only do this AFTER you've downloaded any files from the card that you may want to keep. 2 Time & Date Adjust the date / time as required using the OK button to toggle through the fields and use the up & down buttons to set the values. Press MENU to exit and return to the Setup Menu. 3 Language Select your preferred language Options: English, Danish, German, Spanish, French, Italian, Dutch, Norwegian, Finnish, Swedish Default: Follows your First Time Use selection. 4 Screen Saver Turn on the screen saver function to shut down the screen after 30 seconds of inactivity. Press any button to reactivate the display. Options: On and Off Default: Off Setup Menu Device Sounds Auto Power Off Number / License Plate Parking Mode Back Enter 5 Device Sounds Turn On/Off the beep that sounds when a button is pressed. Start up sound is NOT muted. Options: On and Off Default: On 6 Auto Power Off Adjust the timing of the Auto Power Off function, this can be used to continue recording in event of loss of power within in the vehicle. Options: 10 seconds, 1 minute, 2 minutes Default: 10 seconds 7 Number / License Plate Enter the registration number for your vehicle, this will then be shown on the recorded video files. Use the OK button to toggle through the fields and use the up & down buttons to set values. 8 Parking Mode When Parking Mode has been turned on, the Dash Cam enters standby mode when the 12Vdc supply has been turned OFF (typically removing your ignition key). The Dash Cam will also enter standby mode if no physical movement is detected for 5 minutes, Should physical movement of the vehicle be detected, the Dash Cam will power on and start recording a 1 minute protected video. If no further physical movement is detected then the Dash Cam will return to standby mode. If physical movement is detected subsequently, then the camera will continue to record normally, i.e. driving once more. Options: On and Off Default: Off 21 Setup Menu Options (cont.) Setup Menu System Info Keep User Settings Default Settings Back Enter 9 System Info Information such as Dash Cam model, Battery Status, Firmware version, and SD card data can be found here. This information covers multiple screens (pages), press OK scroll through as required. 10 Keep User Settings Turn this On in order to keep your preferred individual user settings during the Dash Cam update process. Select Off in order to clear all user settings and return them to defaults during the Dash Cam update process. Options: On and Off Default Setting: Off 11 Default Settings Resets your Dash Cam to the default settings. 22 Video Mode The key below explains the various information displayed on the screen when your Dash Cam is in Video mode. Some icons will only be displayed once the relevant function has been selected within the Video menu, as described below. 1 MODE MENU 2 3 1234 ABC 1234 ABC 1234 ABC 4 16:04:37 14/10/2017 56 7 1 Audio Recording ON Can be switched OFF in the Dash Cam Setup Menu. 2 Parking Mode ON Can be switched OFF in the Dash Cam Setup Menu. 3 File is Protected Indicates that the file has been protected. This will appear either when the `protect' button is manually pushed, or when the G Sensor is triggered. 4 Recording Duration Up to 3 minutes. Length can be changed in Setup Menu. 5 Stamps These will appear on the recorded file (license place, time/date, etc). 6 Time Display Can be manually changed in Dash Cam Setup Menu. 7 Date Display Can be manually changed in Dash Cam Setup Menu. Photo Mode The key below explains the various information displayed on the screen when your Dash Cam is in Photo mode. Some icons will only be displayed once the relevant function has been selected within the Photo menu, as described below. 8 MODE MENU 16:04:37 14/10/2017 9 10 8 Photo Mode Press `Mode' Button to select Video, Photo, and Playback. Time Display 9 Can be manually changed in Dash Cam Setup Menu. Date Display 10 Can be manually changed in Dash Cam Setup Menu. Playback Mode The key below explains the various information displayed on the screen when your Dash Cam is in Playback mode. 11 00000001.JPEG/.AVI 0:43 12 1234 ABC 1234 ABC OK: MODE: 16:04:37 14/10/2017 :NEXT :PREV 13 MODE MENU 3 5 15 14 11 File Name Photos are saved as JPEGs. Videos saved as .AVI. 12 Recording Duration Elapsed Time. 13 Time/Date Display Can be manually changed in the Dash Cam Setup Menu. 14 Navigation Use the Up and Down buttons on the right of the Dash Cam to scroll through the photos and videos stored on the SD card. 15 Playback options; Press Record to Play/Pause. Press Mode to Stop and return to the preview screen. 23 Playback Mode Menus If the Menu button is pressed while scrolling through your videos, you will open the Playback Menu, giving you the option to protect, unprotect, or delete files. You can use the Menu button as a back button while in the menu system. How to Delete Files Using the Up and Down buttons, select `Delete Files' On the next page, you will be asked if you want to ONLY delete the video/photo you are on, or if you would like to delete all (unprotected) files. Once you have made your selection, you will be asked to confirm your choice. When your choice is confirmed, you will be redirected back to Playback Mode to continue scrolling through your videos and photos. Playback menu Delete Files Protect Files Back Enter How to Protect/Unprotect Files Using the Up and Down buttons, select `Protect Files' On the next page, you will be asked if you want to Protect or Unprotect the file you are currently on. You cannot protect a file that is already protected, and likewise cannot unprotect a file that is already unprotected. This action will have no effect and will divert back to the Playback display. When you successfully protect or unprotect a file, a red padlock icon will be added or removed, respectively. This will be visible on the Playback display which you will be immediately diverted to, following your selection. Playback menu Delete Files Protect Files Back Enter Delete Files Delete this file ? Cancel OK Back Enter Protected Files cannot be deleted. Unprotect a file first to delete it. Delete Files Delete File Delete ALL Files Back Enter 00000001.JPEG/.AVI 0:43 1234 ABC 1234 ABC OK: MODE: 16:04:37 14/10/2017 :NEXT :PREV Delete Files Delete ALL files ? Cancel OK Back Enter Protect Files Protect File Unprotect File Back Enter 00000001.JPEG/.AVI 0:43 The red padlock icon will be added when you PROTECT a video/photo. 1234 ABC 1234 ABC OK: MODE: 16:04:37 14/10/2017 :NEXT :PREV The red padlock icon will be removed when you UNPROTECT a vido/photo. 24 PC Connection PC Connection Access Files Power On Use the supplied USB cable to connect the Dash Cam directly to your PC via the socket on top of the Dash Cam; do NOT connect the USB cable to the Powered Mount. Once connected the Dash Cam will turn on with two options available; `Access Files' and ` Power On ', as described below. Enter Use the UP and DOWN buttons to select required function and press OK to confirm selection. Access Files (Windows) When this option is selected, the Dash Cam will function as a card reader for your PC. An extra drive will appear, e.g. NEXTBASE (D:) and you will be able to view / manage the stored files upon the MicroSD card within the Dash Cam. You will be able to view your files using your system's default media player. The Dash Cam is a `read-only' device, therefore uploading files to the SD card when in Mass Storage mode is not possible. If you wish to add files to the SD card you can do this using a MicroSD card reader. Access Files (Mac) When this option is selected, the Dash Cam will function as a card reader for your MAC. The 'Nextbase' external USB disk icon will appear on your MAC and you will be able to view and/or manage stored files. You will be able to view your files using your system's default media player. The Dash Cam is a `read-only' device, therefore uploading files to the SD card when in Mass Storage mode is not possible. If you wish to add files to the SD card you can do this using a MicroSd card reader. Power On (Windows & Mac) When this option is selected, the Dash Cam will power on with all functions available. This includes charging of the internal battery; a full charge will take approximately 2 hours. Firmware Update Information Firmware controls the basic functioning of the Dash Cam. If your Dash Cam is not functioning correctly, you may need to update the firmware. Firmware updates may also be released to fix bugs, and improve the general functionality of the Dash Cam. In short, it's important to keep the firmware on your Dash Cam up to date so it can operate to it's full capacity. We recommend you regularly check for updates to get the most from your Dash Cam. How to Check your Dash Cam's current Firmware Version Within the Setup Menu, on page 3, select `System Info'. Here you will find information relating to your Dash Cam, including what firmware version is currently active (i.e R05.3). How to Update Firmware on your Dash Cam Connect your Dash Cam's SD Card to PC using a card reader. This will open a file explorer drive, (e.g) Removable Disk (E:) and show the contents of your SD Card. Go to the `Support & Downloads' page on nextbase.com and download the newest firmware version (i.e R05.4); this will download as .bin file. Drag and drop the .bin file to the SD Card explorer. Eject the SD card and insert it back into your Dash Cam. When you connect the power cable your Dash Cam will turn on, and will automatically begin updating. While updating, both the NextbaseTM logo beneath the screen and the red LED to the left of the screen will start flashing. Once the update has been completed, the logo and LED will stop flashing, and your Dash Cam will automatically restart. Notes: If `Keep User Settings' is turned ON in the Setup Menu, your Dash Cam will boot up normally, straight into video live view mode, ready to use. If `Keep User Settings' is turned OFF, after the update is complete, the Dash Cam will boot up into the First Time Use menu, which must be completed before the Dash Cam can be used. Be sure to externally back up any files you want to keep before updating the firmware. MODE MENU ALWAYS turn OFF the Dash Cam before disconnecting from your PC/Mac. 25 NextbaseTM SD Cards For best results, we recommend using our NextbaseTM branded SD cards with your Dash Cam, available to purchase online from nextbase.com or your nearest retailer. 16GB 32GB 64GB 128GB CE Mark Information (Conformité Europénne) The CE (Conformité Européenne) mark is a symbol (below) printed on products to indicates it's conformity with health, safety, and environmental protection standards for products sold within Europe. It is used on many products across many industries (for example, SD cards) as a mark of compliance with European standards. MODE MENU Approx 2 hours footage. Approx 4 hours footage. Approx 8 hours footage. Approx 16 hours footage. We recommend formatting your SD Card every 2 weeks to ensure that there is enough space to record and store new footage. When formatting, protected files WILL be deleted. If you wish to keep these protected files, you must back then up externally, most commonly by saving files to a desktop computer, or another secure storage point. To clear your SD card, go to the `Format SD Card' function in your Dash Cam's Setup settings Menu and follow the instructions on screen. Setup Menu Format SD Card Time & Date Language Screen Saver Setup Menu All data will be deleted! Cancel OK Please wait ... Format successful In recent years, many variations of this mark have appeared in the market. While similar, the mark above is the only variant that is associated with, and declares compliance with European standards. Other marks, like the ones below, do not guarantee that the product it is attached to or is compliant with European standards for sale in the European Economic Area (EEA). The main difference between a legitimate CE mark and a misused CE mark is the spacing of the letters. The letters, C and E, tend to be formed identically, however the spacing between them is what separates the real from the false. The images below show how the letters should be spaced. There will never be additional markings such as a border or circle used on a legitimate CE Mark. CE Mark False CE Mark (too close) False CE Mark (too far) As products without the correct CE marking are not guaranteed to comply with European Health and Safety standards, those products are potentially less reliable and could pose a safety risk. Be aware of the CE marking when purchasing electrical products. The descriptions above of false CE markings are not comprehensive; be aware that new variations may appear on the market. 26 Frequently Asked Questions Problem Video Image is blurred. I cannot insert the MicroSD card. I cannot remove the MicroSD card. Video Files cannot be played on my computer. Video File playback is jumpy. The sound is not synchronised with video during playback. Video has no sound. Photograph is blurred. I can only record a few minutes of video on my MicroSD card. Access Files does not work. I cannot save files to the memory card when the Dash Cam is connected to my computer under `Access Files'. The sucker will not stay in place upon my windshield. My Dash Cam shuts down by itself after a while. No power to my Dash Cam but it works upon my computer. I can't delete files on my SD card within the Dash Cam. www.nextbase.com support@nextbase.com Solution Remove the protective lens cover, clean the lens, make sure the windshield is clean and clear of grease, dirt, and debris. Ensure that the Polarising FIlter has been set properly; see the Accessories Manual (available from www.nextbase.com) for instructions on how to set up the Lens. MicroSD cards are very small and require delicate use. Align the card with the diagram shown upon the Dash Cam and insert the card until you feel a slight spring resistance. You now need to push the card, using your finger nail until you hear and feel a small click. Release pressure and the card will stay retained within the Dash Cam. If you are having difficulty, use the edge of a small coin. With the card installed, using your fingernail, you now need to push the card further inwards slightly, until you hear and feel a small click. If you are having difficulty, use the edge of a small coin. Release pressure and the MicroSD card will spring out far enough for you to take a hold of it. The video files from the Dash Cam are in .AVI format and may not be compatible with your computer if suitable playback software is not installed. Remove the SD card and format to remove non-contiguous files. Back up any files you wish to keep before formatting the SD Card. For best recording use a branded class 10 type (48MB/s) or UHS type 1 micro SD card of 8 to 32GB recommended size. PC may not be sufficient for the playback task, try a different PC. Copy the recorded video files onto the PC / Mac for playback directly rather than use the Dash Cam as a card reader, as the USB system on your PC may be too slow for HD video playback. The Codecs upon your PC may not be compatible or the latest standard. Download the latest Codecs from: www.nextbase.com. Ensure that `Record Audio' setting is turned ON within the Video Menu. Hold the camera still whilst taking the photo. Be aware that the photo is taken approximately 1 second after the shutter sound is heard. Change the recording size (Video Length function) to a smaller size. Increase the size of the MicroSD card. Max 32GB. In the Setup Menu, ensure that Recording History is set to Maximum. Minimum limits the total number of recordings on your Dash Cam to 4. The Access Files function will work on both Windows and Mac. Restart the PC, as this may be required for the necessary driver to be loaded correctly. Disconnect and reconnect the Dash Cam. Please bear in mind you cannot transfer files to the Dash Cam in `Access Files'. Files can be transferred to the SD Card using an SD Card reader. Correct, the Dash Cam is a `read-only' device. It is not recommenced to save files from other sources to the same memory that you will use for recording within the Dash Cam, as these may have a negative effect on the performance of the Dash Cam. Ensure that the protective cover (plastic film) has been removed from the suction pad. Moisten the sucker slightly before affixing upon the windshield. Ensure that the locking lever is fully closed. Make sure that the glass is smooth and clean. Do not stick to glass that has any non-smooth effect or paint whatsoever. Affix to the glass firmly and then close the locking lever fully. Either the battery has gone flat, there is no power to the Dash Cam and the Auto Power Off period has been triggered or Parking Mode has been turned on and no vehicle movement has been detected for 5 minutes. The cigarette power cable is not working. Inspect the fuse in the Car Power Cable plug. Replacement fuse = 2A 32mm type. If the fuse is found to be blown, inspect the power cable for damage which may have caused the fuse to blow. Check to see if these files are `protected'. If so please follow instructions to `un-protect'. 27 Frequently Asked Questions (page 2) Problem The screen blanks after a few minutes upon my Dash Cam. I get the message: "Cluster size wrong. Please format SD card" on screen. The battery will not charge. The battery only lasts 30 seconds. The battery only lasts 10 - 15 minutes. I get the message "SD Card Error" on screen. I get the message "Card Full" on screen. I have turned on `Parking Mode' and now can't stop the recording. When I press the Menu button nothing happens. Downloading files from www.nextbase.com using Google Chrome results in a Malicious Software message. There's no PC Connection screen when connected to my computer. My Camera feels warm when it is operating. Unresolved Issues Solution The screen saver is set to ON. Change settings to OFF if required. Default setting is OFF. The SD card has been formatted in another device and the Cluster size is not compatible. Use the Setup Menu to format the SD card from within the SD card. Ensure the Dash Cam is connected to a reliable power source and that the supplied Car Power Cable is being used, with the blue LED lit. The battery will only receive charge when the Dash Cam is connected to a power source Charging takes approximately 2 hours and a full charge is indicated when the blue LED on the Dash Cam goes out. To charge, take the Dash Cam indoors and charge it for 2 hours; once fully charged, check to see if the problem persists. If it persists, the car power supply may be causing the issue. This is normal, the battery design allows the 'Auto Power Off' feature to function in event of power loss within the vehicle. It is not intended as an alternative power source to replace the supplied car adaptor. The SD card has become unusable by the Dash Cam. Back up useful files to your PC and then Format your SD card from within the Dash Cam setup menu. The SD card has become full as there are too many protected files which cannot be deleted to allow for further recording to take place. Transfer useful files to your PC and delete unnecessary files, or Format the SD card from within the Dash Cam setup menu. The Dash Cam will start a recording whenever motion is detected. To turn off Parking Mode firstly shutdown the Dash Cam and remove the SD card, this will avoid recording being activated accidentally. Switch the Dash Cam On and within the Setup Menu, turn off the 'Parking Mode'. This is normal during recording. Stop the recording before pressing the MENU button. If recording re-starts before you can press MENU, then see the Parking Mode section above. This is not a cause for concern, as this message will appear whenever new software is downloaded from the internet. Simply go to the settings within Google Chrome and turn off the malicious software protection temporarily to download and install the playback software. Reinstate previous Google Chrome settings afterwards. Try multiple USB ports and an alternative mini USB cable (if possible). Please ensure it is inserted into the USB port on the Dash Cam and not into the mount. It is normal for the camera to feel warm during typical use, especially when it's recording high definition video or communicating via Wi-Fi. Reset the Dash Cam to the default settings within the Setup Menu and try again. Should the problem persist call the UK helpline (02920) 866429 or call your local support centre, found at www.nextbase.com Alternatively email: support@nextbase.com www.nextbase.com support@nextbase.com 28 Software License Agreement By using the device, you agree to be bound by the terms and conditions of the following software licence agreement. NextbaseTM grants to you for the period for which you possess the relevant device a non-exclusive, non-transferrable (save in circumstances where you sell or transfer the relevant device to another person please see below for more details) a limited license to use the software embedded in this device (the "Software") in binary executable form in the normal operation of the product together with any documentation and material (whether printed or on-line) made available by NextbaseTM in respect of the Software (the "Documentation"). Title, ownership rights, and intellectual property rights in and to the Software and the Documentation remain in NextbaseTM and/or its third-party providers. You acknowledge that the Software and the documentation is the property of NextbaseTM and/or its third-party providers and is protected throughout the world by intellectual property rights laws and treaties, including the United States of America and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of NextbaseTM and/or its third-party providers and that the Software in source code form remains a valuable trade secret of NextbaseTM and/or its third-party providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software or the Documentation. You agree not to copy, rent, lease, sub-license, loan, translate, merge, adapt, vary, alter or modify, the whole or any part of the Software or Documentation nor permit the Software or any part of it to be combined with, or become incorporated in, any other programs You agree not to export or re-export the Software or Documentation to any country in violation of the export control laws of the United States of America or the export control laws of any other applicable country. If you use MyNextbase ConnectTM or MyNextbase PlayerTM, you must comply with the applicable terms of use and acceptable use policies, which can be found at www.Nextbase.com. 29 Warranty Limited Warranty This limited warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state (or by country or province). NextbaseTM does not exclude, limit or suspend other legal rights you may have under the laws of your state (or country or province). For a full understanding of your rights you should consult the laws of your state, country or province. NextbaseTM Liability extends to the cost of the Dash Cam alone. Any recordings which have not taken place or recoverable from the SD card for whatever reason are not covered by the product warranty. No liability for costs incurred due to corrupt, missing, erased video recordings will be accepted. No claims for additional costs outside the cost of the Dash Cam itself will be accepted. NextbaseTM products are warranted to be free from defects in materials or workmanship for one year from the date of purchase, with batteries warranted to be free from defects in materials or workmanship for six months from the date of purchase. Within this period, NextbaseTM will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labour, provided that the customer shall be responsible for any transportation cost. This Limited Warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an authorised service provider of NextbaseTM; (v) damage to a product that has been modified or altered without the written permission of NextbaseTM, or (vi) damage to a product that has been connected to power and/or data cables that are not supplied by NextbaseTM, or (vii) damage to a product that has been connected to 12Vdc directly, having cut off the Cigarette Lighter plug which contains the 12/24Vdc to 5Vdc adaptor. In addition, NextbaseTM reserves the light to refuse warranty claims against products or services that are obtained and/or used in contravention of the laws of any country. To the maximum extent permitted by applicable law, the warranties and remedies contained in this limited warranty are exclusive and in lieu of, and NextbaseTM expressly disclaims, all other warranties and remedies, whether express, implied, statutory, or otherwise, including without limitation any implied warranty of merchantability or fitness for a particular purpose, statutory remedy or otherwise. This limited warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state and from country to country. If implied warranties cannot be disclaimed under the laws of your state or country, then such warranties are limited in duration to the duration of this limited warranty. Some states (and countries and provinces) do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall NextbaseTM be liable in a claim for breach of warranty for any incidental, special, indirect or consequential damages, whether resulting from the use, misuse or inability to use this product or from defects in the product. Some states (and countries and provinces) do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. If during the warranty period you submit a claim for warranty service in accordance with this Limited Warranty, then NextbaseTM will, at its option: (i) repair the device using new parts or previously used parts that satisfy NextbaseTM's quality standards, (ii) replace the device with a new device or a refurbished device that meets NextbaseTM's quality standards. Such remedy shall be your sole and Warranty (cont.) exclusive remedy for any breach of warranty. Repaired or replaced devices have a 30 day warranty. If the unit sent in is still under its original warranty, then the new warranty is 30 days or to the end of the original 1 year warranty, whichever is longer. Before seeking warranty service, please access and review the online help resources available on www.nextbase.com. If your device is still not functioning properly after making use of these resources, contact a NextbaseTM Authorised service facility in the original country of purchase or follow the instructions on support at www.nextbase.com to obtain warranty service. If you seek warranty service outside of the original country of purchase, NextbaseTM cannot guarantee that the parts and products needed to repair or replace your product will be available due to differences in product offerings and applicable standards, laws and regulations. In that case, NextbaseTM may, in its sole discretion and subject to applicable laws, repair or replace your product with comparable NextbaseTM products and parts, or require you to ship your product to a NextbaseTM Authorised service facility in the country of original purchase or to a NextbaseTM Authorised service facility in another country that can service your product, in which case you will be responsible for complying with all applicable import and export laws and regulations and for paying all custom duties, V.A.T., shipping fees and other associated taxes and charges. In some cases, NextbaseTM and its dealers may be unable to service your product in a country outside of the original country of purchase or return a repaired or replaced product to you in that country due to applicable standards, laws or regulations in that country. Online Auction Purchases of Non-New Goods Products purchased through online auctions are not eligible for NextbaseTM warranty coverage. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. NextbaseTM will not replace missing components from any package purchased through an online auction. International Purchases A separate warranty may be provided by international distributors for devices purchased outside the United Kingdom depending on the country. If applicable, this warranty is provided by the local in-country distributor and this distributor provides local service for your device. Distributor warranties are only valid in the area of intended distribution. 30 More NextbaseTM Products Dash Cams Eyes on the Road NextbaseTM offers a wide range of Dash Cams to best suit your driving needs. Rear View Cameras Ready for the Drive The new rear facing cameras offer views on the road behind as well as ahead, protecting you from all angles. Accessories Ready for the Drive Everything you might need for video storage, Dash Cam protection, and more. NextbaseTM Services and Software MyNextbase.com CloudTM MyNextbase ConnectTM Access your footage anywhere in the world using the free online web portal. (Internet connection required) The new Nextbase App to transfer, view, and edit footage on your smart-phone or tablet. Dash Cam Services Compatibility MyNextbase CloudTM MyNextbase ConnectTM MyNextbase PlayerTM View, edit, and share your footage on your computer with the new easy to use free PC/Mac software. MyNextbase PlayerTM For more details on our full range of Dash Cams and Accessories, download the NextbaseTM Accessories Manual, available from www.nextbase.com 31 Dash Cam Functions NextbaseTM Emergency Response NextbaseTM Module Cam Compatible (Rear Cam, Rear Facing Cam) Nextbase CloudTM Storage MyNextbase PlayerTM MyNextbase ConnectTM 32 NBDVR122-ENG-R2
Corel PDF Engine Version 17.6.0.1021 CorelDRAW X7
