Joan
WF-3001
Utilisation du coffre-fort Pour ouvrir le coffre-fort, vous devez entrer un code à quatre chiffres. Le code actuel du coffre-fort est 0000. Vous pouvez utiliser ce code ou entrer votre propre code.
coffret-cadeau-enfants
WF-3001 The "MONEY SAFE" guards your personal stuff. Use the safe to store things like your play jewelry, playing cards. The note auto feeder and coins slot at the top lets you use the safe as a piggy bank. Important: - "MONEY SAFE" is made in accordance with European safety and EMC regulation, attested by the label "CE" fixed on the box. - Not suitable for the children under 3 years old as the toy is electrical and mechanical in nature. - The "MONEY SAFE" is recommended for the ages 6 and up. Batteries installation: NOTE: Any batteries purchased for use in the Safe may pose a hazard to children. Please check safety notice supplied with batteries before use. There are three "AA / LR6" batteries (excluded) to power the Safe. We recommend using alkaline batteries only and to never use rechargeable batteries. Cautions: - Use fresh batteries of the required size and recommended type only. - Do not mix old and new batteries. - Never mix alkaline batteries with other types of batteries. - If you do not plan to use the Safe for several weeks, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. Follow these steps for batteries installation. 1. Use a screwdriver to loosen the screws in the battery compartment cover, then lift up the cover. 2. Put batteries in the compartment as indicated by the polarity symbols (+ and -) marked inside. 3. Replace the cover and tighten the screws. If the Safe does not work properly, its lights dim, replace the batteries. Using the Safe To open the Safe, you have to enter a four-digit code. The present code for the Safe is 0000. You may either use the present code or enter your own. See "Changing the code". Follow these steps to use the Safe. 1. Enter the 4-digit code, the green light switches on. If you enter the wrong code, the red light switches on and produces negative sounds. 2. Rotate the knob clockwise and pull open the door. Green light switches on for about 10 seconds and you hear creaking sound. If the door is kept on open for longer than 10 seconds, green lights will be off and produce beep sound every 20 seconds to remind you close the door. 3. When you finish, close the door to lock the Safe. Changing the Code The factory default code of the Safe is 0000. To change the code, follow these steps: 1. Enter the current code (default: 0000) and open the door. 2. Hold the * button down until both green and red lights flashing. 3. Within 15 seconds, enter the new 4-digit code. Press # button to store your new code, both lights stop flashing. Note: If the new code is not entered within 15 seconds , the procedure will terminate and you will have to restart the changing procedure. 4. Release the * button and close the door of the Safe. Note: If you forget the code, it can be reset to factory default by removing and reinstalling the batteries.. Beeps Sound or Voice 1. Move the switch on the back side of door to set the beeps sound or voice. 2. Close the door of the Safe. Note: The sound setting may be vary by the development in different countries, some version is without of Voice version. Auto Note Feeder - Push the note into the feeder softy, the Safe will catch your note automatically. Note: To protect your child, do not allow to insert any cards, hard objects or fingers to the feeder slot. Also, be aware the hairs or clothes being caught in the feeder.
Microsoft Office Word 2007 Microsoft Office Word 2007
